Technology Simplified

Your Technology Companion

Archive for September, 2009

Microsoft Unveils its Thinnest Bluetooth Keyboard

Sep 9

Posted by Admin in New Technologies | No Comments

Microsoft has unveiled its thinnest keyboard ever, the Bluetooth Mobile Keyboard 6000, made exclusively for Laptops and Desktops. It’s a stylish, clean and refined product, offering comfort with Microsoft’s Curve layout. The keyboard also features a portable Bluetooth number pad.

Microsoft 6000This keyboard is just a few millimeters thicker than a AAA sized battery and tapers down towards the front making it light and easier to pick up. It provides comfortable and ergonomic typing experience through Microsoft Curve layout, unlike flat laptop keyboards. It also addresses the biggest pain points of notebook customers, a missing number pad. This keyboard features a stand-alone number pad, which can be used a feature with notebook machines. This number pad comes with a carrying case for enhanced portability and will be sold separately also. 

Microsoft has unveiled its thinnest keyboard ever, the Bluetooth Mobile Keyboard 6000, made exclusively for Laptops and Desktops. It’s a stylish, clean and refined product, offering comfort with Microsoft’s Curve layout. The keyboard also features a portable Bluetooth number pad.

This keyboard is just a few millimeters thicker than a AAA sized battery and tapers down towards the front making it light and easier to pick up. It provides comfortable and ergonomic typing experience through Microsoft Curve layout, unlike flat laptop keyboards. It also addresses the biggest pain points of notebook customers, a missing number pad. This keyboard features a stand-alone number pad, which can be used a feature with notebook machines. This number pad comes with a carrying case for enhanced portability and will be sold separately also.

Source: Microsoft

  • Share/Bookmark

Tags: 6000, bluetooth, Keyboard, Microsoft, thin, thinnest

ERROR_INVALID_PARAMETER(0×80070057) on upgrading Vista to Service Pack 2

Sep 9

Posted by Admin in Troubleshooting, Windows Vista | No Comments


Security is a key concern in today’s computing environment. With multiple vulnerabilities identified in Microsoft Vista and XP Operating Systems in past few months, it is impreative for users to ensure that all updates and Service Packs are installed on their machines.

The Error_Invalid_Parameter (0×80070057),  primarily happens due to a conflict with old Application Compatibility Update for Windows Vista & Windows 2008. You can resolve this by following either of the 2 steps mentioned below. Please note that you may also get another error “One or more drivers may be incompatible. The driver listed below might be incompatible with Vista Service Pack 2. Check to see if a solution is available, and then restart the installation after the problem is resolved”

STEP 1: Install the latest update for Application Compatibility for Windows Vista and Windows 2008 and then install Service Pack 2.

STEP 2: Uninstall the Application Compatibility Update for Microsoft Windows Vista and Windows 2008, install Service Pack 2 and then install the latest update for Application Compatibility. To uninstall the update, follow the steps below:

  1. Click on “Start” and then click on “Control Panel”
  2. Under “Programs” section, click “Uninstall a Program”
  3. In the Task List in the navigation pane, click on “View installed Updates”
  4. Now click on “Update for Microsoft Windows (KB 972036)” and then click on “Uninstall”
  5. Click on “Yes” when prompted for confirmation
  6. Restart the computer when you are prompted for it.
  • Share/Bookmark

Tags: 0x80070057, 2, Driver, Error_Invalid_Parameter, incompatible, Microsoft, Pack, Service, Vista, windows

Windows XP Error: STOP 0×000000024 or NTFS_FILE_SYSTEM

Sep 4

Posted by Admin in Troubleshooting, Windows XP | 1 Comment


You may encounter a blue screen stop error while starting your Windows Vista Operating System. This usually happens when the computer is unable to access booting files or the File System. If you encounter this message, follow the steps below:

  1. Restart the Computer
  2. Tap the “F8” key while the computer is restarting to get to the Startup Options screen
  3. From this options screen, use the arrow keys on the keyboard to highlight “Safe Mode” and then press “Enter” key
  4. Once you reach the desktop of your Windows XP computer, click on “Start”à “Run” and type “chkdsk c:/f” and press the “enter” key.

This will launch the disk checking wizard which will look at the Hard Drive on your computer for any bad sectors. If there are many bad sectors, you should take back-up of your data and replace the hard drive.

 

If above steps do not work, follow the steps below:

  1. Go to the “Safe Mode” as described above
  2. Double Click on “MY Computer” or click on “Start” and then click on “My Computer”.
  3. On the next screen, right click on the primary hard drive partition and on the pop-up menu, click on “Properties”.
  4. On the next screen, click on the “Tools” tab
  5. Click on “Check Now” button in the “Error Checking” box

Make sure that you check the option for “Scan and attempt recovery of bad sectors” on the Check Disk options screen. You can also select “Automatically Fix” file systems check box.

  • Share/Bookmark

Tags: 0x000000024, Error, Microsoft, NTFS_File_System, Stop, windows, XP

Windows 7 Hibernation Error: STOP 0x000000A0 Internal_Power_Error

Sep 3

Posted by Admin in Operating System, Troubleshooting, Windows 7 | No Comments


If you are using Windows 7, you may encounter a STOP error when you attempt to put your computer in Hibernate mode. This mode allows users to save battery / power on their laptop/desktop machine. This allows users to store the open programs and files status on the hard drive which is recovered instantly once you resume from the Hibernate mode.

This issue has been confirmed by Microsoft and happens if the current Hibernate file is not large enough to accommodate current memory contents.

If you encounter this issue, follow the simple steps below:

  1. Click on “Start” and click on “All Programs”. Now Click on “Accessories” on the Start Menu
  2. Right Click on “Command Prompt” and on the pop-up menu, click on “Run as Administrator”

If you are prompted to enter an administrator password, please type the password and/or confirmation for the same.

  1. You will now reach a command prompt window with a blinking cursor. On this screen type “powercfg /hibernate/size 100”
  2. It will take you back to a blinking cursor without any message. Now type “exit” to get out of command prompt.

 

These steps will resolve the issue by increasing the size of Hibernate file on your computer.

  • Share/Bookmark

Tags: Hibernate, Microsoft, STOP error, Windows 7

Upgrade to Windows 7 from Windows Vista gets stuck at 62%: Solution

Sep 3

Posted by Admin in Operating System, Troubleshooting, Windows 7 | No Comments


If you have attempted or are planning to upgrade to Windows 7 from Windows Vista, you may encounter an issue during the upgrade process. The upgrade may get stuck at 62% with no error messages. It will stay at 62% for a very long time.

If you encounter this situation, follow the steps below:

  1. Restart the computer. This step will roll back the upgrade and you will be able to boot into Windows Vista installation.
  2. Once on the Windows Vista desktop screen, Click on “Start” and Right Click on “Computer”
  3. On the pop-up menu, click on “Properties” and then click on “Advanced System Settings”
  4. On this System Settings screen, click on “Environment Variables” button

Vista System Properties

5. On the next screen, click on “New” button under “System Variables”

6. On the new window, you will see options to enter Variable Name and Variable Value. In these boxes, type the following information:

  1. Variable Name: MIG_UPGRADE_IGNORE_PLUGINS
  2. Variable Value: IphlpsvcMigPlugin.dll

Now click on “OK” and return to the desktop screen.

 

Now restart the upgrade process. This time it should go ahead with the installation process.

If you still face this issue, please leave a comment or submit the details using the “Request Solution” tab on this page.

  • Share/Bookmark

Tags: 62%, Microsoft, Setup, Stuck, Upgrade, Vista, Windows 7

HP All in One Device Manager does not work with Snow Leopard

Sep 1

Posted by Admin in Apple, Troubleshooting | 1 Comment


After upgrading your Mac OS X to Snow Leopard, you may not be able to use your Hewlett Packard(HP) All in One’s device manager. This Device Manager allows users to scan multiple pages and club the output into one single PDF. While the Snow Leopard’s interface is much better, it does not allow such scanning output. If you also intend to scan multiple pages into single PDF document and are facing issues after upgrading to Snow Leopard on your Macintosh machine, follow the steps below:

  1. Open the Preview
  2. Click on “File” menu
  3. Now click on “Import from Scanner”
  4. Select your scanner from the installed scanner list. When you select your scanner, a new window for “Your Scanner Name” will appear.
  5. Click on “Details” button. On this screen adjust the settings for color and size
  6. Uncheck the options for “Detect Separate Items” and change the format to “PDF”
  7. Click on “Scan”

Once the scanning is complete, you will see a preview of all pages into a single PDF file.

  • Share/Bookmark

Tags: AIO, All in One, Apple, HP, Mac, macintosh, Scanner, Snow Leopard